Powered Pallet Truck
From: £222.00
Powered Pallet training will consist of choosing either A1 pedestrian, A2 rider or A5 Pallet Stacker Truck.
A Powered Pallet Truck (PPT) is commonly used to move and load or offload pallets from a variety of vehicles. powered pallet trucks are commonly found in warehouses, so this is a popular course for those working in that environment.
Courses for all experience levels
N
Novice Level Training
Trainees with little or no previous experience operating the relevant truck.
E
Experienced Forklift Training
Trainees with relevant experience who have not received any approved training, or certification is expired (over five years from issue date).
R
Forklift Refresher Training
Periodic forklift refresher training for experienced operators who hold an accredited certificate issued in the last five years.
C
Forklift Conversion Training
Training on a truck of a similar level to the one that the operator has already been trained, tested, and certified on.
What’s Included
Once you complete and pass your Powered Pallet Truck (PPT) training, you will be able to:
- Train with an ITSSAR accredited Forklift instructor who will build your knowledge and comprehension around the safe operating and use of a Powered Pallet Forklift Truck.
- Ability to complete your course at one of our training depots with dedicated warehouse and training facilities.
- Or, depending on your location, complete your course at your own site
- Gain Certificate of completion after your course.
- Printed certificate and ID card available at an extra cost.
- A1 & A2 – Stacking and De-Stacking with laden pallets.
- A5 – Stacking at eye-level and high-level. (Machine dependent)
Course Modules
The following list are the elements that make up a novice Powered Pallet Truck Forklift course. For experienced operators, safety refresher and conversion courses the list can be shorter.
- Course induction
- The need and reasons for training and statutory requirements (HASAWA 1974, Provision and Use of Work Equipment Regulations 1998 (PUWER) Lifting Operations and Lifting Equipment Regulations (LOLER) 1998 & L117 Approved code of practice
- Introduction to equipment/control familiarisation/principles of operation
- Identification/use/adjustment of attachments in pre-determined positions including forks
- Recommended mount and dismount
- Introduction to motive, steering controls and practice
- Basic steering exercises – simple courses
- Advanced steering exercises – figure of 8/chicane/90° approaches
- Battery charging procedures/maintenance
- Operator safety code and relevant handout
- Daily pre-use inspections/refuelling procedures
- Engineering principles/rated capacity/stability
- Simple hydraulics (theory)
- Introduction to hydraulic controls, handling empty pallets low-level
- Load types/handling and weight assessment
- Stacking/de-stacking at low, medium and high levels on industrial racking (A5 only)*
- Stacking/de-stacking at low, medium and high levels bulk stacks (A5 only)*
- Stacking/de-stacking at low, medium and high levels cup post pallets (A5 only)*
- Manoeuvring with loads/ramps and inclines/handling awkward loads*
- Relevant safety films
- Vehicle loading and unloading (theory)*
- Vehicle loading and unloading (practical)*
- Multi-choice theory test
- Pre-use inspection test
- Practical skills test
* To be covered where relevant to operation or facilities permit
Course Benefits
ITSSAR Accredited Training
Dedicated Training Areas
Experienced Instructors
Powered Pallet Forklift & Training Hardware Provided
Course Durations
1 Day
3 Days
5 Days
Durations available for this specific course.
Forklift Requirements
To complete training to operate a Powered Pallet Truck (A1, A2 or A5), you must be at least 16 years old. The Forklift you are planning to operate must be the Truck you are completing training and testing for.
Ongoing requirements
it is advised you should complete refresher training every 3-5 years to keep your PPT certification in date. As stated in the ACOP L117 You can complete this training in 1-day. We also offer the experienced operator training if you cannot locate your certification.
Test Requirements
You will complete three tests in total.
- Theory Test.
- Pre-use Inspection Test.
- Practical Skills Test.
Theory Test:
The first is the theory test, which includes 25 multiple choice questions. Each question in each set is worth a maximum of 4 marks making a total of 100 marks available.
You will receive 5 open questions which will typically be presented in written form. Then, there will be 10 multiple choice questions relating to safety and 10 multiple choice questions relating to operation of the machine.
The pass mark is 80% (80 out of 100 marks).
Pre-use Inspection test:
The pre-use checks test is designed to evaluate an operator’s ability to correctly asses and check the key components of the powered pallet truck to ensure the vehicle is safe and fit for use and includes checking key areas of the forklift as listed below.
Walkaround Visual Checks:
- Rated Capacity Plate
- Forks arms/attachments
- Carriage/Load Guard (A5 Only)
- Hydraulic Hoses (A5 Only)
- Masts/Mast Rollers/Slide Channels (A5 Only)
- Lift Chains (A5 Only)
- Wheels
- Tyres
- External Condition of bodywork
- Lights & Warning Indicators
Functional Checks:
- Horn and Warning Alarms
- Hydraulic Controls
- Drive and Braking
- Steering
- Repel pad
Fuel Checks:
- Electric
- Electrolyte Levels
- Cable Connections
- General Cleanliness
- Battery Security
Practical Skills Test:
This test has been devised to examine the critical skills required of a powered pallet truck operator, these are:
- Mounting, dismounting and parking a truck
- Starting and stopping a truck
- Driving forwards and in reverse, including braking
- Steering accurately
- Using hydraulic controls correctly and sympathetically
- Lifting and travelling with a load
- Judging the position of fork tips at varying heights, laden and unladen (A5 Only)
- Judging the position of fork tips at low-level, laden and unladen (A1 & A2 Only)
- Placing loads accurately
- Stacking and de-stacking accurately at various heights (A5 Only)
- Observing the working environment and judging speed, height, width and distance from within the confines of the machine
The practical test will show your instructor that you have taken on the competencies and are able to implement them when using a Powered Pallet Truck (PPT). This consists of how safely you operate the vehicle, and penalty points will be given if you complete a task which is deemed unsafe, such as erratic and improper use of the controls.
The cut off for the practical skills test is 20 penalty points for A1 & A2, whereas A5 is currently 30 points. Each test is timed with a maximum of instructors rehearsed time doubled. i.e. instructor can complete in 10 minutes; student is allowed up to 20 minutes in this case for their test. A further allowance of 15 minutes is available but will incur 1 penalty point per additional minute used.
Further Training
Refresher training is available for anyone who’s certification is about to expire (every five years). Proof of your certification is needed before you can complete refresher training.
If you need to operate more than one type of Forklift, you can complete a conversion course, permitting you have proof of your training & testing of the other Forklift Truck (a forklift certification, for example).
However, you can also upskill and complete our Forklift Instructor course, where you can train candidates on safe forklift operation.
Earning Potential
Reputable Salary Checkers estimate the following for a forklift operator across the South Coast:
While all efforts have been made to ensure the accuracy of this information, we suggest conducting your own research and use these figures for information purposes only.
- Forklift Operators in Hampshire averages £26,205 per annum
- Forklift Operators in Reading averages £27,495 per annum
- Forklift Operators in Worthing averages £32,638 per annum
- Forklift Operators in Portsmouth averages £27,871 per annum
- Forklift Operators in Havant averages £27,585 per annum
Earning potential differs depending on the job role you are looking for. Many who use the A1, A2 & A5 FLTs work as warehouse operatives, as these are warehouse type trucks.
Who is this course for?
This course is perfect for school leavers and over the age of 16 so long as you are not working within a Port, which would require you to be at least 18 years of age. If you already have the certification for the A1, A2 and/or A5 truck, but it’s about to expire, you can book the refresher course. If you cannot produce your certification, you will have to complete the Experienced Operator course. The novice course is best suited for anyone with no experience whatsoever.
A good understanding of spoken and written English is required for this course. Translator may be required to assist if English is not the first language as required within ITSSAR standards.
What can I operate with a PPT certification?
Upon successful completion of your course, you will be able to operate a Powered Pallet Truck under the “A” Group. You should only ever operate the forklift type you completed training and testing for.
What will you receive upon successful completion of this course?
Upon successfully passing this course, you will receive an accredited certificate issued by 2 Start and added to the ITSSAR TOPS register. You can also (for a small additional cost) receive an ID card for the Trained Operator Passport Scheme (TOPS) – this is available from ITSSAR directly.
Frequently Asked Questions
What is PPT Forklift Operator Training?
PPT Forklift Operator Training teaches individuals how to safely operate Powered Pallet Trucks (PPT), which are used to move pallets and other materials in warehouses and industrial settings. The training covers proper operation, safety protocols, and maintenance to ensure operators can work efficiently while minimizing the risk of accidents.
Who needs PPT Forklift Operator Training?
Anyone who operates a Powered Pallet Truck in a work environment, such as warehouses, distribution centers, or retail storage areas, should undergo PPT Forklift Operator Training. This training is required to meet health and safety regulations and to ensure operators are equipped with the skills needed to work safely and effectively.
Why Choose 2 Start?
Reputable
High Pass Rates
Established in 2008
Industry Leading Training Provider
Independently Owned
6 Dedicated Training Centres
VIEW COURSESTrusted
4.9 Star Rating on Google Reviews
DVSA Approved 3a Examiners
DVSA Approved Test Centres
APAR Approved Training Provider
RLI Certified LGV Instructors
BOOK NOWAccredited
Accredited Instructors & Courses
Regular Accrediting Body Audits
Exceptional Audit Pass Marks
Listed With 9 Accrediting Bodies
Verifiable Accreditations
THE TEAMOnly logged in students who have purchased this course previously may leave a review.
Reviews
There are no reviews yet.